Chinese translation for "working diameter"

工作直径

Related Translations:

diameter:  n.1.直径。2.(显微镜等的)放大倍数。短语和例子a lens magnifying 2,000 diameters 能放大二千倍的透镜。

bitemporal diameter:  颞间径

cylinder diameter:  缸径气缸直径汽缸内径汽缸直径

diameter coefficient:  直径系数

grain diameter:  颗粒直径粒径药柱直径

passage diameter:  通道直径

cervicobregmatic diameter:  颈前囟径

flange diameter:  安装盘直径

pilot diameter:  导向直径引导空直径

diameter craniometric:  测颅径

Example Sentences:

	1.	Through changing mr brake working diameter parameters , distance parameters and temperature and etc . brake torque change of the mr brake is set out 通过改变磁流变液的种类、制动器的工作直径、工作间隙、温度等参数，分别得出了制动器制动力矩的变化值。
	2.	Conclusions can be drawn from the graph of brake torque change of the mrp brake : using different mrp , the brake torque varied very much ; with the same working diameter , the same width of working face and the same distance , the brake torque of plate mrp brake is bigger than that of cylindrical mrf brake ; in a certain range of temperature , temperature has little effect on the brake torque ; while working diameter and working distance of the brake has obvious effect on the brake torque , so in the design , these two parameter should be emphasized 从制动器制动力矩的变化曲线得出：磁流变液不同，制动力矩变化很大；在相同工作面直径、工作面宽度和工作间隙的条件下，盘式磁流变液制动器的制动力矩比圆柱形磁流变液制动器大；在一定的温度范围内，温度对磁流变液制动器的制动力矩影响不大；而制动器的工作直径、工作间隙对磁流变液制动器的制动力矩有明显的影响，所以在设计中应重点考虑这两个参数。

Similar Words：

"working depth" Chinese translation, "working depth of tooth" Chinese translation, "working design" Chinese translation, "working details" Chinese translation, "working diagram" Chinese translation, "working diamond" Chinese translation, "working dinner" Chinese translation, "working direct current" Chinese translation, "working direction" Chinese translation, "working directory" Chinese translation